www.gt4dc.co.uk http://gt4dc.co.uk/forum/ |
|
HKS F-con wiring loom converted to emanage http://gt4dc.co.uk/forum/viewtopic.php?f=13&t=7778 |
Page 1 of 1 |
Author: | hally [ Sat Aug 19, 2017 6:55 pm ] |
Post subject: | HKS F-con wiring loom converted to emanage |
Hi guys Bit of an off question i have a hks f con and wiri g loom but it appears no one mapps them any more. I thought i may be able to convert it to work with an e manage. Ovcours using thier plugs and repinning it. Is thid an idea or no good? |
Author: | hally [ Sun Aug 20, 2017 10:10 pm ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
Ill try this again. Bit of an odd question i have a hks f con and wiring loom but it appears no one mapps them any more. I thought i may be able convert it to work with an e manage. Of course using thier plugs and repinning it. Is this an idea or no good? |
Author: | Nibbles [ Mon Aug 21, 2017 9:29 pm ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
I have no experience with any of these products. |
Author: | Sirius [ Mon Aug 21, 2017 10:29 pm ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
I would imagine it would be more trouble than it was worth. These units still have some value - sell it and put the money towards a more supported system like Link or MoTec et al. |
Author: | hally [ Tue Aug 22, 2017 1:05 pm ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
I have tried selling it but no interest unfortunately. I can get an e manage ultimate for a couple of hundred pounds and they are good. I was just a thought as it would save money on a custom loom again. |
Author: | Kris [ Tue Aug 22, 2017 2:30 pm ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
I'd suggest going for a more modern/popular ECU - think you'll struggle to find anyone who has the knowledge/software/cables for the F-Con... |
Author: | mixer72 [ Sun Aug 27, 2017 9:15 am ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
I use this company to map my HKS ecu https://protuner.co.uk/ |
Author: | mixer72 [ Sun Aug 27, 2017 9:16 am ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
there all so on facebook https://www.facebook.com/ProtunerUK/ |
Author: | Muddy Water [ Mon Sep 04, 2017 7:21 pm ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
FYI Chris @PTS can install and set up most aftermarket engine management systems and piggyback controllers such as GReddys excellent E-manage and E-manage Ultimate and Apexi's Power FC, Super AFC and Super ITC units. http://www.performancetuningservices.co.uk/tuning.html May be worth pinging him an email |
Author: | mixer72 [ Mon Sep 04, 2017 7:53 pm ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
the problem with HKS if you need to have the HKS key and HKS software to map it. and you need to be a HKS dealer for them to let you have it. |
Author: | hally [ Mon Sep 18, 2017 10:16 am ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
Well I think i have found a guy in the north east who can map them. I need my car run in before I get that far. |
Author: | Logan88 [ Mon Sep 02, 2019 9:22 am ] |
Post subject: | Re: HKS F-con wiring loom converted to emanage |
I would envision it would be more inconvenience than it was valued. These units still have some worth - sell it and put the cash towards an increasingly upheld framework like Link or MoTec et al. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |