www.gt4dc.co.uk
http://gt4dc.co.uk/forum/

HKS F-con wiring loom converted to emanage
http://gt4dc.co.uk/forum/viewtopic.php?f=13&t=7778
Page 1 of 1

Author:  hally [ Sat Aug 19, 2017 6:55 pm ]
Post subject:  HKS F-con wiring loom converted to emanage

Hi guys
Bit of an off question i have a hks f con and wiri g loom but it appears no one mapps them any more. I thought i may be able to convert it to work with an e manage. Ovcours using thier plugs and repinning it.
Is thid an idea or no good?

Author:  hally [ Sun Aug 20, 2017 10:10 pm ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

Ill try this again.
Bit of an odd question i have a hks f con and wiring loom but it appears no one mapps them any more. I thought i may be able convert it to work with an e manage. Of course using thier plugs and repinning it.
Is this an idea or no good?

Author:  Nibbles [ Mon Aug 21, 2017 9:29 pm ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

I have no experience with any of these products.

Author:  Sirius [ Mon Aug 21, 2017 10:29 pm ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

I would imagine it would be more trouble than it was worth. These units still have some value - sell it and put the money towards a more supported system like Link or MoTec et al.

Author:  hally [ Tue Aug 22, 2017 1:05 pm ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

I have tried selling it but no interest unfortunately.
I can get an e manage ultimate for a couple of hundred pounds and they are good.
I was just a thought as it would save money on a custom loom again.

Author:  Kris [ Tue Aug 22, 2017 2:30 pm ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

I'd suggest going for a more modern/popular ECU - think you'll struggle to find anyone who has the knowledge/software/cables for the F-Con...

Author:  mixer72 [ Sun Aug 27, 2017 9:15 am ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

I use this company to map my HKS ecu

https://protuner.co.uk/

Author:  mixer72 [ Sun Aug 27, 2017 9:16 am ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

there all so on facebook

https://www.facebook.com/ProtunerUK/

Author:  Muddy Water [ Mon Sep 04, 2017 7:21 pm ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

FYI Chris @PTS can install and set up most aftermarket engine management systems and piggyback controllers such as GReddys excellent E-manage and E-manage Ultimate and Apexi's Power FC, Super AFC and Super ITC units. http://www.performancetuningservices.co.uk/tuning.html
May be worth pinging him an email :wink:

Author:  mixer72 [ Mon Sep 04, 2017 7:53 pm ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

the problem with HKS if you need to have the HKS key and HKS software to map it. and you need to be a HKS dealer for them to let you have it.

Author:  hally [ Mon Sep 18, 2017 10:16 am ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

Well I think i have found a guy in the north east who can map them. I need my car run in before I get that far.

Author:  Logan88 [ Mon Sep 02, 2019 9:22 am ]
Post subject:  Re: HKS F-con wiring loom converted to emanage

I would envision it would be more inconvenience than it was valued. These units still have some worth - sell it and put the cash towards an increasingly upheld framework like Link or MoTec et al.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/