www.gt4dc.co.uk http://gt4dc.co.uk/forum/ |
|
ST185 Rc & CS Differences http://gt4dc.co.uk/forum/viewtopic.php?f=13&t=7589 |
Page 1 of 1 |
Author: | Nibbles [ Wed Apr 13, 2016 2:01 pm ] |
Post subject: | Re: ST185 Rc & CS Differences |
I wasn't aware of any differences in bottom arms at the front, I seem to remember we replaced a bent one on a CS with a spare from a widebody a-a. Maybe they've added a bracket or re-designed the mount. |
Author: | Diceman [ Wed Apr 13, 2016 2:09 pm ] |
Post subject: | Re: ST185 Rc & CS Differences |
I guess a part search on an EPC would confirm which bits are different. |
Author: | cms-gt4 [ Tue Apr 19, 2016 2:52 am ] |
Post subject: | Re: ST185 Rc & CS Differences |
I knew they had different dampers but I am not seeing a difference on toyodiy as far as control arm mount or components. |
Author: | Diceman [ Tue Apr 19, 2016 9:23 am ] |
Post subject: | Re: ST185 Rc & CS Differences |
I do wonder if these amenments were carried across to all vehicles after around 08/91 and then became standard. It's known that some items were changed on later vehicles such as the gearstick mechanism, 9 stud head/manifold, ECU. CMS did you compare late spec ST185 part nos to similar age CS/RC or early spec ST185? |
Author: | cms-gt4 [ Tue Apr 19, 2016 7:21 pm ] |
Post subject: | Re: ST185 Rc & CS Differences |
I just copied the part numbers and pasted them in the search for relevant vehicles and it showed all models. I remember when I first got my alltrac back in 99 there was talk about revisions across the board. In 1992 the US model had loads of changes, from wiring, sway bars, to small engine changes. Sadly, it seems there was never much proper documentation on this. 51201-20230 Crossmember 43330-29225 Ball joint 48069-20250 Control arm 43212-20130 ABS Spindle 48075-20040 Rear arm bracket 48643-20060 Lower arm shaft 48520-20660 Front shocks 48811-20660 Front bar (Only models in japan share the PN) In the US there was two different front bars. 48131-2H890 Front springs (even less models share this part) Link to compare PN. http://www.toyodiy.com/parts/xref?s=486 ... E=on&mJ=on Note these are based on RC part numbers. CS model seems harder to sort out on this application. I also have the old cd based BGB that had original part numbers. Most of which do not come up in modern systems or will at least show they have been superseded. Sadly, I no longer have a computer old enough to run it. I had an old dos machine with two cd players to access it. I quit using it largely because I would then have to figure out what the new pn changed to. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |