Thanks to "bigger Kris" @ Gt fours for the info.
| www.gt4dc.co.uk http://gt4dc.co.uk/forum/ |
|
| ST205 ECU Pin Out Diagram http://gt4dc.co.uk/forum/viewtopic.php?f=13&t=2834 |
Page 1 of 1 |
| Author: | Muddy Water [ Thu Mar 05, 2009 1:19 pm ] |
| Post subject: | ST205 ECU Pin Out Diagram |
Does anyone have access to a JDM ST205 ECU Pin Out Diagram? Trying to locate the Speed Sensor wire out the back of the ECU so that I can wire in my Turbo Timer. Thanks. |
|
| Author: | Diceman [ Thu Mar 05, 2009 2:40 pm ] |
| Post subject: | |
|
Thanks to "bigger Kris" @ Gt fours for the info. |
|
| Author: | Muddy Water [ Thu Mar 05, 2009 11:27 pm ] |
| Post subject: | |
Thanks for that. OK so the Speed Sensor wire out the back of the ECU is SP1 but do you happen to know what colour it is? |
|
| Author: | Sirius [ Fri Mar 06, 2009 12:01 am ] |
| Post subject: | |
Just look at the ECU and count the wires - right hand plug top row third wire in from the left is the one. 
|
|
| Author: | Diceman [ Fri Mar 06, 2009 10:28 am ] |
| Post subject: | |
Colours are irrelevant to me I am afraid. |
|
| Author: | TrackToyFour [ Fri Mar 06, 2009 2:35 pm ] |
| Post subject: | |
Diceman wrote: Colours are irrelevant to me I am afraid.
Must be a bit challenging on the wiring front. Can you see stripes or differences in solid colour? |
|
| Author: | Diceman [ Fri Mar 06, 2009 3:04 pm ] |
| Post subject: | |
I can see that there are colours and sometimes stripes but not what actual colour they are. DTA install is gonna be fun
|
|
| Author: | Muddy Water [ Fri Mar 06, 2009 7:15 pm ] |
| Post subject: | |
Thanks for everyones help 
I sorted it today 
Speed Sensor wire = SP1 = As you look at the ECU from behind, it's the right hand plug, top row, third wire in from the left = Orange. |
|
| Author: | TrackToyFour [ Fri Mar 06, 2009 11:27 pm ] |
| Post subject: | |
How did you actually connect the turbo timer wire to the orange speed sensor wire...solder, scotch block etc? |
|
| Author: | Muddy Water [ Sat Mar 07, 2009 10:04 am ] |
| Post subject: | |
Quote: How did you actually connect the turbo timer wire to the orange speed sensor wire...solder, scotch block etc?
The Turbo Timer loom comes with a purple lead that has male & female insulated bullet connectors - the best way of describing the wire arrangment is it looks like a 'y'. I just cut the orange wire and installed (crimped) some male & female insulated bullet connectors and then plug'n'play. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|