Don't know the sizes off the top of my head but wonder what you're aiming to do? I read somewhere that if you want more braking effort you actually need to go down in master cylinder size
| www.gt4dc.co.uk http://gt4dc.co.uk/forum/ |
|
| Master Cylinder sizes? http://gt4dc.co.uk/forum/viewtopic.php?f=13&t=2828 |
Page 1 of 1 |
| Author: | Dorris [ Fri Feb 27, 2009 11:16 pm ] |
| Post subject: | Master Cylinder sizes? |
Question: Does any one know what the master cylinder piston sizes are in a 185 and 205? Or is there are any other bigger master cylinders that will bolt on to a 185? Cheers guys, Dorris |
|
| Author: | TrackToyFour [ Sat Feb 28, 2009 12:04 am ] |
| Post subject: | |
Don't know the sizes off the top of my head but wonder what you're aiming to do? I read somewhere that if you want more braking effort you actually need to go down in master cylinder size
|
|
| Author: | Dorris [ Sat Feb 28, 2009 1:01 am ] |
| Post subject: | |
I know where your coming from Don with the theory of the smaller master cylinder verses a bigger slave cylinder; it’s all part of Pascal's principles etc, etc, all boring stuff! Had to learn it all as hydraulics is a big part of my job, anyway hopefully it will all become apparent once I’ve finished but I’ve still yet to find the facilities to get the engine out and stripped before I do anything else, again work getting in the way. Dorris |
|
| Author: | Diceman [ Sat Feb 28, 2009 1:28 am ] |
| Post subject: | |
Hmmmm, why do I have visions of mr dorris knocking up a hydraulic engine removal device with a hand pumped master cylinder????? |
|
| Author: | Dorris [ Sat Feb 28, 2009 1:34 am ] |
| Post subject: | |
Diceman wrote: Hmmmm,
why do I have visions of mr dorris knocking up a hydraulic engine removal device with a hand pumped master cylinder????? I aint that crude lol Im just thinking a head thats all, i will start on the car sometime this year...........honest 
|
|
| Author: | Muddy Water [ Sat Feb 28, 2009 11:14 am ] |
| Post subject: | |
I have a complete 205 servo unit to go in my 185...watch this space. |
|
| Author: | Meurz [ Sat Feb 28, 2009 5:18 pm ] |
| Post subject: | |
DJ once said the internals are the same? |
|
| Author: | cms-gt4 [ Sat Feb 28, 2009 6:32 pm ] |
| Post subject: | |
I can't remember where I got my info since it was so long ago but in the evo8 caliper thread I posted. st205 Master Cylinder bore: 24mm I have read the 185 w/ abs has a 1" bore, while the non abs has a 15/16". So 24mm is very close to 1". I am unsure if there was a non abs 205. If there is there may be additional data floating around for alternate MC sizes. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|