These look the same as the TRD mounts so wouldn't be surprised if they are made by the same manufacturer
Looks like the TRD uprated engine mounts shown on the left of the diagram below have been discontinued
| www.gt4dc.co.uk http://gt4dc.co.uk/forum/ |
|
| C-ONE Uprated Engine Mount Set http://gt4dc.co.uk/forum/viewtopic.php?f=13&t=2804 |
Page 1 of 1 |
| Author: | Muddy Water [ Thu Feb 12, 2009 11:17 pm ] |
| Post subject: | C-ONE Uprated Engine Mount Set |
Is there any way of distinguishing between the standard ST205 engine mounts and the C-ONE Uprated Engine Mount Set? Are there any distinct markings to look for? Can the rubber mounting be tested in any way? Thanks |
|
| Author: | TrackToyFour [ Fri Feb 13, 2009 12:00 am ] |
| Post subject: | |
These look the same as the TRD mounts so wouldn't be surprised if they are made by the same manufacturer
Looks like the TRD uprated engine mounts shown on the left of the diagram below have been discontinued
|
|
| Author: | MarkCL [ Fri Feb 13, 2009 2:00 pm ] |
| Post subject: | |
I think I still have a couple of the TRD ones - brand new & unused & up for sale to any seriously interested persons. Will have a look and put the part numbers up... Cheers Mark |
|
| Author: | TrackToyFour [ Fri Feb 13, 2009 6:13 pm ] |
| Post subject: | |
You have PM .......... |
|
| Author: | Muddy Water [ Fri Feb 13, 2009 6:40 pm ] |
| Post subject: | |
I have just bought a C-ONE Uprated Engine Mount Set off ebay but wanted to confirm that's actually what I got. They have no markings on. They look similar to what I have on my car already hence the original question. I assume that its the rubber bushes part of the mount that are different? |
|
| Author: | TrackToyFour [ Sat Feb 14, 2009 12:58 am ] |
| Post subject: | |
Yes, the TRD mounts look almost identical to the OEM mounts. From the pics of the C-One kit they look very similar too. I have a set of TRD mounts so it would be fascinating to compare them with the C-One kit you have and take some pics |
|
| Author: | Muddy Water [ Tue Feb 24, 2009 5:25 pm ] |
| Post subject: | |
I have now confirmed that I have the C-ONE 3-piece engine mount set. Had them fitted last Saturday (thanks Peter). Also took photos of the standard and C-ONE mounts side by side. Engine Mount - Passenger side. Standard mount at the top - C-ONE mount at the bottom. 
Gearbox mount - front. Standard mount on the right - C-ONE mount on the left. 
Gearbox mount - rear. Standard mount on the right - C-ONE mount on the left. 
There is one particular thing that I notice and that is the vibration of the engine is that much more noticeable - perhaps rather obvious considering that the rubbers of these mounts are a lot harder. |
|
| Author: | TrackToyFour [ Wed Feb 25, 2009 3:53 pm ] |
| Post subject: | |
Muddy Water wrote: There is one particular thing that I notice and that is the vibration of the engine is that much more noticeable - perhaps rather obvious considering that the rubbers of these mounts are a lot harder.
I can testify to that following last nights 'road test'  ....just gluing my fillings back in as we speak 
|
|
| Author: | two_OH_five [ Wed Feb 25, 2009 4:56 pm ] |
| Post subject: | |
I'm sure the Erin Doors loves them Nigel
|
|
| Author: | Muddy Water [ Wed Feb 25, 2009 10:18 pm ] |
| Post subject: | |
Quote: I'm sure the Erin Doors loves them Nigel
She doesn't know or tried it yet 
Been nice knowing you guys
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|