www.gt4dc.co.uk
http://gt4dc.co.uk/forum/

st205 aussie downpipe quick answer needed!!!
http://gt4dc.co.uk/forum/viewtopic.php?f=1&t=549
Page 1 of 1

Author:  stevenb [ Tue Jan 31, 2006 8:56 pm ]
Post subject:  st205 aussie downpipe quick answer needed!!!

Would one of these fit onto my Uk st185 CS?
Is the bolt/nut pattern the same on both cars?

Cheers guys

Steve

Author:  Kris [ Tue Jan 31, 2006 9:03 pm ]
Post subject: 

The quick answer is yes

The long asnwer is the 185 and 205 have differing amounts of studs, but removal of 1 x 205 stud is the same pattern as a 185 :D

Author:  stevenb [ Tue Jan 31, 2006 9:05 pm ]
Post subject: 

Kris wrote:
The quick answer is yes

The long asnwer is the 185 and 205 have differing amounts of studs, but removal of 1 x 205 stud is the same pattern as a 185 :D


You mean to hacksaw it off? :lol:

Cheer for the quick reply Kris.. :wink:

Author:  stevenb [ Tue Jan 31, 2006 9:10 pm ]
Post subject: 

is this worth bidding on for my st185 CS?
The guy lives in my own home town.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1

Author:  two_OH_five [ Tue Jan 31, 2006 9:16 pm ]
Post subject: 

I would say yes up to say 100

The 205 one will drop straight on but there will be one spare hole in it.

This is for the extra stud Kris mentioned that the 205 CT20 has

Author:  stevenb [ Tue Jan 31, 2006 9:18 pm ]
Post subject: 

Super.
What would I need to do? Cut off a stud or fill a hole? :oops: I've never done a de-cat on any car.... :oops:

Cheers

Steve

Author:  Kris [ Tue Jan 31, 2006 9:35 pm ]
Post subject: 

Do not cut any stud off!

You won't need to since it is the 205 which has the extra stud...

If you were to fit this to the 205 then it might be a possibility that you may have to UNSCREW the extra stud

Author:  sillycar gt4cs [ Tue Jan 31, 2006 9:44 pm ]
Post subject: 

i won it sorry steve

Author:  stevenb [ Tue Jan 31, 2006 9:46 pm ]
Post subject: 

You again :!: :lol:
Last time I post my ebay interests..... :lol: :lol: :lol:

Author:  sillycar gt4cs [ Tue Jan 31, 2006 9:48 pm ]
Post subject: 

:oops: :oops:

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/