www.gt4dc.co.uk http://gt4dc.co.uk/forum/ |
|
BRD Built st185 401bhp http://gt4dc.co.uk/forum/viewtopic.php?f=1&t=2877 |
Page 54 of 56 |
Author: | mixer72 [ Fri Oct 27, 2017 9:38 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
new cage all ready to be fitted |
Author: | mixer72 [ Thu Nov 02, 2017 9:06 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
all serviced and ready for the next part of the big build |
Author: | mixer72 [ Sat Nov 11, 2017 8:36 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
more work on the new cage fitting and new seat rails fitted. . more or less done now just the rear legs to sort out and bit of touch up paint work in the cage |
Author: | mixer72 [ Mon Nov 13, 2017 8:27 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
well that's it fitted, just a bit of paint to touch up, then onto sorting the engine bay loom out |
Author: | mixer72 [ Tue Nov 28, 2017 7:19 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
pretty happy with how the cam cover has come out straight out the tank then with 4 coats of 2K lacquer and with the AN -10 fitting |
Author: | mixer72 [ Sun Dec 03, 2017 2:04 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
just finished making these up ready to ship out to the customers |
Author: | mixer72 [ Mon Dec 04, 2017 6:25 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
so thought I would try the turbo housing. not bad did not want it to in you face |
Author: | mixer72 [ Thu Dec 07, 2017 8:11 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
custom boss blank made vac chamber fitted all ready to fit 4bar map sensor and new charge temp sensor |
Author: | andycaca [ Sat Dec 09, 2017 9:15 am ] |
Post subject: | Re: BRD Built st185 401bhp |
all this hard work Lou, will it be ready for TSS next year? |
Author: | mixer72 [ Sat Dec 09, 2017 9:50 am ] |
Post subject: | Re: BRD Built st185 401bhp |
With any luck yes and some hill climb events |
Author: | mixer72 [ Sun Dec 10, 2017 5:42 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
old loom out and stripped to what is needed, all ready to add the new parts of the loom for all the new sensors |
Author: | Muddy Water [ Mon Dec 11, 2017 7:12 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
Very Impressive Lou |
Author: | mixer72 [ Mon Dec 11, 2017 8:51 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
loom more or less done ready to fit back in the car |
Author: | Diceman [ Tue Dec 12, 2017 11:46 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
Nice progress. Did you look to see if it's possible to separate the chassis and engine loom sections? |
Author: | mixer72 [ Wed Dec 13, 2017 12:07 am ] |
Post subject: | Re: BRD Built st185 401bhp |
Dident get into it that far. Just did what I needed for now. |
Page 54 of 56 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |