www.gt4dc.co.uk http://gt4dc.co.uk/forum/ |
|
BRD Built st185 401bhp http://gt4dc.co.uk/forum/viewtopic.php?f=1&t=2877 |
Page 51 of 56 |
Author: | ST185pinjo [ Thu Dec 03, 2015 5:28 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
at least 2 every season... |
Author: | mixer72 [ Thu Dec 03, 2015 7:27 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
all part of racing and im all ways looking to see what other mods and any more power I can tweak out the set up I have |
Author: | mixer72 [ Fri Dec 04, 2015 3:07 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
new mod to the uprated fuel rail, the 5th injector out let is not going to feed a remote fuel pressure gauge |
Author: | mixer72 [ Fri Dec 18, 2015 12:13 am ] |
Post subject: | Re: BRD Built st185 401bhp |
bit of head work and cleaning up with TVIS deleted ready to fit back on |
Author: | mixer72 [ Sat Dec 26, 2015 5:08 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
so a bit more work on the engine today |
Author: | mixer72 [ Fri Jan 08, 2016 10:00 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
so done a bit more work on the car |
Author: | mixer72 [ Sat Feb 13, 2016 5:42 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
doing a bit of work on the fuel rail set up, mock up of the rail |
Author: | ST185pinjo [ Mon Feb 15, 2016 5:54 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
Dual feed? |
Author: | mixer72 [ Mon Feb 15, 2016 6:23 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
ST185pinjo wrote: Dual feed? yes was all ready running duel feed, just im making it better |
Author: | Sirius [ Tue Feb 16, 2016 1:40 am ] |
Post subject: | Re: BRD Built st185 401bhp |
Any reason you didn't take the block out of the car for engine assembly? Must be difficult to have kept everything clean and grit free? Whats the coating/paint you have used on the fuel rail and water elbow - is an interesting finish. |
Author: | mixer72 [ Tue Feb 16, 2016 8:47 am ] |
Post subject: | Re: BRD Built st185 401bhp |
was just quicker for me to do it in the car this time. its not to hard to do in the car, just have to keep cleaning down all the time think I cleaned it about 6 times be for fitting any new parts, the rail was dry blasted then pained in in a textured high temp paint same as the exhaust manifold and water elbow |
Author: | mixer72 [ Fri Mar 04, 2016 7:18 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
fuel rail more or less ready to fit |
Author: | mixer72 [ Tue Mar 15, 2016 10:53 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
getting there |
Page 51 of 56 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |